In the latest step forward in the collaboration of the Renault- Nissan Alliance and Daimler, Nissan’s Decherd, Tenn., plant will build Mercedes-Benz 4-cylinder engines for Infiniti and Mercedes-Benz starting in 2014.

Nissan and Daimler will produce Mercedes-Benz 4-cylinder gasoline engines together at Nissan’s powertrain assembly plant in Decherd, Tenn. Production will begin in 2014, with installed capacity of 250,000 units per year once full ramp–up is achieved. The Decherd facility will produce engines for Mercedes-Benz and Infiniti models.

“This is the newest milestone in our pragmatic collaboration and our most significant project outside of Europe so far,” said Renault-Nissan CEO Carlos Ghosn. “Localized capacity reduces exposure to foreign exchange rates while rapidly enabling a good business development in North America – a win-win for the Alliance and Daimler.”

The collaboration marks the first production of Mercedes-Benz engines in the North America Free Trade region. The Tennessee plant’s strategic location and logistics links ensure a direct supply of engines starting in 2014 for the Mercedes-Benz C-Class, built at Daimler’s vehicle plant in Tuscaloosa, Ala.

“In the context of our Mercedes-Benz 2020 growth strategy, we have decided that we will expand the production capacities required for this close to the customers. Through the strategic extension of our cooperation with Renault-Nissan we can realize near-market engine production in the NAFTA region on attractive economic terms and make optimum use of synergies arising from the cooperation,” Dr. Dieter Zetsche, Chairman of the Daimler Board of Management and Head of Mercedes-Benz Cars, said. “Thus we are systematically broadening our manufacturing footprint in this important growth market.”

Nissan began powertrain assembly in Decherd in 1997. Today it manufactures 4-, 6- and 8-cylinder engines for the complete lineup of U.S.-produced Nissan and Infiniti vehicles. The plant also houses crankshaft forging and cylinder block casting operations. In 2011, Decherd produced more than 580,000 engines on a covered area of more than 1.2 million square feet (111,000 square meters).

Project portfolio expands

Daimler and the Renault-Nissan Alliance launched their strategic collaboration in April 2010, including an equity exchange that gives the Renault-Nissan Alliance a 3.1 percent stake in Daimler and Daimler a combined 3.1 percent interest in Renault and Nissan.

The collaboration began with three project pillars:

• Joint smart/Twingo architecture: The project is on track for launch in the early first quarter of 2014. Two-seater smart vehicles will be produced at Daimler’s plant in Hambach, France, and four-seater smart and Renault production are slated for Renault’s plant in Novo Mesto, Slovenia.
• All-new entry-level city van project for Mercedes-Benz: The project is on schedule with expected launch in late 2012.
• Powertrain cross-supply: The Alliance is supplying Daimler with compact three-cylinder gasoline engines to be used in smart and Twingo vehicles and four-cylinder diesel engines to be used in the jointly developed light commercial vehicle and in Mercedes-Benz’s next generation of premium compact cars. Daimler will supply Nissan and Infiniti with four- and six-cylinder gasoline and diesel engines from the current and future engine portfolio as well as with automatic transmissions.

Since its founding in April 2010, the collaboration has been gradually expanded. In addition to the announcement this week about North American engine production, the companies had also earlier decided to partner on:

• Platform sharing: Infiniti plans to base a premium compact vehicle on the Mercedes compact-car architecture, starting in 2014.
• Zero-emission vehicles: Daimler will provide batteries from its production facility in Kamenz, Germany, and Renault-Nissan will provide electric motors for the use in electric vehicles (smart and Twingo ZE). First releases will occur in 2014.

Media Contacts :

Nissan North America
Paula Angelo
+1-615-509-4390
[email protected]

Renault-Nissan Alliance
Rachel Konrad
+33 6 17 62 01 72
[email protected]

Daimler AG
Marc Binder
+497111741349
[email protected]

Bettina Singhartinger
+497111740598
[email protected]

Further information is available on the Internet at: www.nissannews.com, www.media.daimler.com and blog.alliance-renault-nissan.com

Decherd plant b-roll is available on: nissannews.com/pressrelease/1025/175/video-gallery

This document contains forward-looking statements that reflect our current views about future events. The words “anticipate,” “assume,” “believe,” “estimate,” “expect,” “intend,” “may,” “plan,” “project,” “should” and similar expressions are used to identify forward-looking statements.These statements are subject to many risks and uncertainties, including a lack of further improvement or a renewed deterioration of global economic conditions, in particular a renewed decline of consumer demand and investment activity in Western Europe or the United States, or a downturn in major Asian economies; a continuation or worsening of the tense situation in the credit and financial markets, which could result in a renewed increase in borrowing costs or limit our funding flexibility; changes in currency exchange rates or interest rates; the ability to continue to offer fuel-efficient and environmentally friendly products; a permanent shift in consumer preference towards smaller, lower margin vehicles; the introduction of competing, fuel-efficient products and the possible lack of acceptance of our products or services, which may limit our ability to adequately utilize our production capacities or raise prices; price increases in fuel, raw materials and precious metals; disruption of production due to shortages of materials, labor strikes, or supplier insolvencies; a further decline in resale prices of used vehicles; the effective implementation of cost-reduction and efficiency-optimization programs at all of our segments, including the repositioning of our truck activities in the NAFTA region and in Asia; the business outlook of companies in which we hold an equity interest, most notably EADS; changes in laws, regulations and government policies, particularly those relating to vehicle emissions, fuel economy and safety, the resolution of pending governmental investigations and the outcome of pending or threatened future legal proceedings; and other risks and uncertainties, some of which we describe under the heading “Risk Report” in Daimler’s most recent Annual Report and under the  headings “Risk Factors” and “Legal Proceedings” in Daimler’s most recent Annual Report on Form 20-F filed with the Securities and Exchange Commission. If any of these risks and uncertainties materialize, or if the assumptions underlying any of our forward-looking statements prove incorrect, then our actual results may be materially different from those we express or imply by such statements. We do not intend or assume any obligation to update these forward-looking statements. Any forward-looking statement speaks only as of the date on which it is made.

PDF: 

The_Alliance_News.pdf